Sender: |
|
Date: |
Sun, 17 Apr 2005 12:50:03 +0800 |
Reply-To: |
|
Subject: |
|
MIME-Version: |
1.0 |
Content-Transfer-Encoding: |
7bit |
Content-Type: |
text/plain; charset="us-ascii" |
Organization: |
The Varendorff Consultantcy |
From: |
|
Parts/Attachments: |
|
|
Jenny Evans advises us:
>You will need to make sure scanning is
>undertaken to the highest quality possible to ensure all information is
>captured from the plan? Not only to the highest quality but you need to
>establish quality controls and to capture the necessary metadata about the
>engineering drawings themselves.
This is sound advice from Jenny.
Be careful not to confuse highest quality with highest DPI as the two are
not necessarily compatible.
I strongly recommend adherence to the advice provided in the ANSI/IIM
Standard - MS 44-1988 [REVISED 1993] titled "Recommended Practice for
Quality Control of Image Scanners".
I sell Resolution Test Targets here in Australia to support the process
detailed in the Standard - MS 44-1988 and I have had occasion to advise
clients that higher DPI setting do not necessarily produce improved Quality.
In some tests we did on a clients scanner produced the following results
based on the testing process recommended in the Standard - MS 44-1988.
DPI Setting used while scanning a Photographic Resolution Test Target for
Scanners.
1. @ 75 DPI = Lousy results
2. @ 150 DPI = Improved and possibly acceptable results
3. @ 200 DPI = Improved and acceptable results
4. @ 300 DPI = Similar result to the 200 DPI file
5. @ 600 DPI = A much poorer result with characters imploding and
building in on themselves and a generally totally unacceptable result.
Outcome of the test was that the higher the DPI setting did not necessarily
provide an improved result.
My advice TEST- TEST & TEST first before you make a decision on the setting
for scanning any document or engineering drawing.
Also remember DPI is only one factor in the scanning equation.
Regards, Laurie
Mr Daniel Lawrance [Laurie] Varendorff, ARMA
Member of the Western Australian Government - State Records Commission (SRC)
- Digital Records Working Group (DRWG).
Specialist Technical Writer on Records and Information Management (RIM) and
related subjects, available for hire.
Published Articles available @ http://www.microfilm.net.au/articles.shtml
A Records Management Professional, and proud of the fact!
Consultant/Trainer/Tutor/Presenter: Records and Information Management
Imaging and Micrographic Specialist: 31 years experience
Representing: Digital Microfilm Equipment - DME
You may care to visit our web site @ Digital Microfilm Equipment (DME)
<http://www.microfilm.net.au/> - For all things Micrographic
Alternatively email us @ [log in to unmask]
Our URL is www.microfilm.net.au <http://www.microfilm.net.au/>
The Varendorff Consultancy ABN: 77 836 801 165
PO Box 6497 East Perth, Western Australia 6892 - AUSTRALIA
PHONE: +61 [0]8 9291 6925 - MOBILE: +61 [0]417 094 147
EMAIL: [log in to unmask]
List archives at http://lists.ufl.edu/archives/recmgmt-l.html
Contact [log in to unmask] for assistance
|
|
|