Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Sat, 10 Jan 2009 00:56:37 -0500 |
Content-Type: |
text/plain; charset=utf-8 |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
On Fri, 9 Jan 2009 @ 15:26:43, Roger Hamperian wrote:
<<I am looking for a tray that could be used to separate layers of smaller =
items in a cubic foot box. Ideally this would have outside dimensions of =
approximately 11 =BD" X 14 =BD" with 2-3" sides. I have searched most of =
the archival supply catalogs without success. I could probably use half =
of an 11 X 14 print storage box, but would like to find something more =
economical. Suggestions anyone?>>
Does it have to be plastic? Why not take a piece of corrugated cardboard about 3" larger than the dimensions you seek, cut a 3" square out of each corner, fold up the sides, tape them (with good archival tape if need be) to form your corners, and viola! You have a tray.
Jim Mullen
Wichita, KS
=20
Roger Hamperian
Lexington, KY=20
List archives at http://lists.ufl.edu/archives/recmgmt-l.html
Contact [log in to unmask] for assistance
To unsubscribe from this list, click the below link. If not already present, place UNSUBSCRIBE RECMGMT-L or UNSUB RECMGMT-L in the body of the message.
mailto:[log in to unmask]
|
|
|